1. Power is transmitted by an electric motor to a machine by using a belt drive. The tensions on the tight and slack side of the belt are 2200 N and 1000 N respectively and diameter of the pulley is 600 mm. If speed of the motor is 1500 r.p.m, find the power transmitted.
a) 46.548 kW
b) 56.548 kW
c) 66.548 kW
d) 76.548 kW
Explanation: Power = Tω
= Frω = Fv
F = T1 – T2 = 2200 – 1000 = 1200N
v = пDN/60 = п x 600 x 1500/1000 x 60 = 47.12 m/s
P = 1200 x 47.12/1000 = 56.548 kW.
2. The flywheel of an engine has a mass of 200 kg and radius of gyration equal to 1 m. The average torque on the flywheel is 1200 Nm. Find the angular acceleration of flywheel and the angular speed after 10 seconds starting from rest.
a) 3 rad/s
b) 4 rad/s
c) 5 rad/s
d) 6 rad/s
Explanation: I = mk2 = 2000 kgm2
T = Iα
α = T/I = 1200/2000 = 0.6 rad/s2
ω = ω0 + αt = 0 + 0.6 x 10 = 6 rad/s.
3. Calculate the moment of inertia and radius of gyration of a solid sphere of mass 10 kg and diameter 6.5m about its centroidal axis.
a) 2.055 m
b) 3.055 m
c) 4.055 m
d) 5.055 m
Explanation: I = 2/5 mr2 = 49 kgm2
k = 0.6325 x 3.25 = 2.055 m.
4. Calculate the work done per minute by a punch tool making 20 working strokes per min when a 30 mm diametre hole is punched in 5 mm thick plate with ultimate shear strength og 450 Mpa in each stroke.
a) 10.69 kNm
b) 20.69 kNm
c) 30.69 kNm
d) 40.69 kNm
Explanation: Force required to punch one hole = area shared x ultimate shear strength = пdt x Ss
Ss = п x 30 x 5 x 450/1000 = 212.05 kN
Work done/min = Average force x Thickness of plate x No. of holes/min
= 212.05/2 x 5/1000 x 20 = 10.69 kNm.
5. In latitude 25.0 S, SA (spin axis) of a FG (free gyro) is in position S40E and horizontal. Find the tilt after 6 hours.
a) 61.16 up
b) 61.16 Down
c) 51.15 up
d) none of the mentioned
Explanation: PZ= 65, ZX = 90, tilt after 6 hours = 90 – ZY =?
In triangle PZX,
Cos PX = Cos Z Sin PZ
Cos PX = Cos 40 Sin 65
Cos PX = 0.694272
PX = PY = 46.031
Again, in triangle PZX,
Cos P = – Cot PZ Cot PX
Cos P = – Cot 65 Cot 46.031
P or angle ZPX = 116.732
Angle XPY = 6 hours = 90. Thus, angle ZPY = 26.732
In triangle PZY,
Cos ZY = Cos P Sin PZ Sin PY + Cos PZ Cos PY
Cos ZY = Cos 26.732 Sin 65 Sin 46.031 + Cos 65 Cos 46.031
ZY = 28.839 and tilt = 61.16 up.
6. The steering of a ship means
a) movement of a complete ship up and down in vertical plane about transverse axis
b) turning of a complete ship in a curve towards right r left, while it moves forward
c) rolling of a complete ship sideways
d) none of the mentioned
Explanation: Steering means is to turn the vehicle to either left or right.
7. When the pitching of a ship is upward, the effect of gyroscopic couple acting on it will be
a) to move the ship towards starboard
b) to move the ship towards port side
c) to raise the bow and lower the stern
d) to raise the stern and lower the bow
Explanation: When the rotor rotates in the anticlockwise direction, when viewed from the stern and the ship is steering to the left, then the effect of reactive gyroscopic couple will be to lower the bow and raise the stern. When the ship is steering to the right under similar conditions, then the effect of reactive gyroscopic couple will be to raise the bow and lower the stern
8. The pitching effect of a naval-ship produces force(s) on which of the following components of the ship?
a) Bearing
b) Lubricant
c) Seals
d) Springs
Explanation: The effect in the form of pitching of a ship produces forces on the bearings which acts in the following direction: horizontal to the motion and perpendicular to the motion in which the ship is travelling. Hence bearings experience the forces due to pitching.
9. Which of the following represent the maximum angular acceleration
a) αmax = Φ(ω1)2
b) αmax = Φ2 (ω1)2
c) αmax = (ω1)2/ Φ
d) αmax = (ω1)2/ Φ2
Explanation: The angular acceleration is given by the formula : α = -Φ(ω1)2 sin (ω1t), hence the maximum will occur when sin (ω1t)=1
10. Pitching is the movement of a ship up and down in a vertical plane about transverse axis.
a) True
b) False
Explanation: Pitching occurs about a transverse axis as a longitudinal oscillatory motion which is further assumed to be Simple Harmonic Motion