a) The program is interrupted after each detection
b) The program will not be stopped and the errors are sorted out after the complete program is scanned
c) There is no effect on the program, i.e the program is executed without rectification of errors
d) The program is halted only at specific points
Answer: d
Explanation: The Breakpoint mode of operation allows the program to be halted at only specific locations
Related Posts
_____________ signal is used as an acknowledgement signal by the slave in Multiple cycle transfers.
Which is fed into the BUS first by the initiator?
The Master strobes the slave at the end of each clock cycle in Synchronous BUS.
The time for which the data is to be on the BUS is affected by __________
The delays caused in the switching of the timing signals is due to __________
In synchronous BUS, the devices get the timing signals from __________
The device which interacts with the initiator is __________
Join The Discussion