a) Low, 500
b) High, 500
c) High, 1000
d) Low, 1000
Answer: d
Explanation: After steaming at low pressure, the chips are brought to the digester pressure of 1000 kPa. At LP, turpentine and gases are vented to the condenser. Then they are picked up in a stream of pulping solution and their temperature is raised to 170°C over 1.5 h. After holding at this temperature for a further 1.5 h, the digestion process is essentially complete.
Related Posts
__________ uses reflectance & absorbance principles for calculating the moisture content.
_________ method id based on dielectric principle.
______________ of moisture measurement is based on chemical reactions.
The oven drying methodology consists of heating by ________
Halogen and infrared drying are the examples of _________________
_____________ is the amount of moisture a material will absorb relative to ambient temperature and humidity conditions.
What is the critical point of water?
Join The Discussion